Transition of Laboratory Management System Based on ISO/IEC 17025:2017 at SNSU-BSN

Chery Chaen Putri, Melati Azizka Fajria, Adindra Vickar Ega, Eka Pratiwi, Yulita Ika Pawestri, Nelfyenny Nelfyenny, Muhammad Haekal Habibie

Abstract


To accommodate current technological developments and laboratory conditions, ISO (International Organization for Standardization) and IEC (International Electrotechnical Commission) published the latest version of the ISO/IEC 17025 standard in 2017. Complying with ISO/IEC 17025:2017 enables laboratory to provide measurement results that are valid and traceable to international unit system. SNSU-BSN as National Metrology Institute (NMI) in Indonesia has transformed its management system from the old version ISO/IEC17025:2005 to the current ISO/IEC 17025:2017 in 2019. This study explains the process of SNSU-BSN transition in order to establish a management system complying with ISO/IEC 17025:2017. A comparison between the implementation of the old and the current ISO/IEC 17025 was explained along with its impacts and benefits.  This study shows that SNSU-BSN as a NMI in Indonesia has successfully implemented the full implementation of the transition from ISO/IEC 17025:2005 to ISO/IEC 17025:2017 in accordance with the time-frame determined by the Joint ILAC-ISO and KAN.


Keywords


calibration, ISO/IEC 17025:2017, management system, measurement, transition process

Full Text:

PDF

References


BIPM. 2020, Calibration and Measurement Capabilities – CMC. retrieved from https://www.bipm.org/kcdb/cmc/quick-search?keywords=indonesia

Danarto, A. (2018). Implementation of ISO/IEC 17025:2017 in Accredited Laboratory. APMP 2018 TCQS Workshop in Singapore.

Direktorat Penelitian dan Pengembangan KPK.Memahami Untuk Melayani-Pelayanan Perijinan dan Non Perijinan sebagai Wujud Tata Kelola Pemerintahan yang Baik.2006. Jakarta.

Ghernaout, D., Aichouni, M., & Alghamdi, A. (2018). Overlapping ISO/IEC 17025:2017 into Big Data: A Review and Perspectives. International Journal of Science and Qualitative Analysis 2018; 4(3): 83-92. DOI: 10.11648/j.ijsqa.20180403.14

Grochau, I.H. & ten Caten, C.S. (2012). A process approach to ISO/IEC 17025 in the implementation of a quality management system in testing laboratories. Accred Qual Assur 17, 519–527. https://doi.org/10.1007/s00769-012-0905-3

ISO/IEC 17025. (2005). General requirements for the competence of testing and calibration laboratories. International Organization for Standardization/International Electrotechnical Committee, Geneva.

ISO/IEC 17025 (2017). General requirements for the competence of testing and calibration laboratories. International Organization for Standardization/International Electrotechnical Committee, Geneva.

ISO/ILAC ISO/IEC 17025:2017 Transition Communiqué (2020).

JCRB. (2018). Resolutions, Recommendations, and Actions of the 39th JCRB Meeting. Sevres France.

Joint IAF-ILAC-ISO Communiqué on ISO/IEC 17025 (2017).

Khodabocus, F. & Balgobin, F. (2011). Implementation and Practical Benefits of ISO/IEC 17025:2005 in a Testing Laboratory. UNIVERSITY OF MAURITIUS RESEARCH JOURNAL – Volume 17. DOI: 10.4314/umrj.v17i1.70730

Komisi Akreditasi Nasional.(2017). Pedoman Penyesuaian Dengan ISO/IEC 17025:2017. Jakarta.

Komisi Akreditasi Nasional. (2017). Surat Sekjen mengenai Penyesuaian Persyaratan Akreditasi Laboratorium dari SNI ISO/IEC 17025:2008 ke SNI ISO/IEC 17025:2017. Jakarta.

Komisi Akreditasi Nasional. (2017). Tata Cara Penyesuaian Pemenuhan Persyaratan Akreditasi Laboratorium Penguji dan Laboraotorium Kalibrasi dari SNI ISO/IEC 17025:2008 ke SNI ISO/IEC 17025:2017. (2017). Jakarta.




DOI: http://dx.doi.org/10.31153/instrumentasi.v45i1.256

Copyright (c) 2021 Instrumentasi

Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Copyright &copy 2015 Jurnal Instrumentasi (p-ISSN: 0125-9202, e-ISSN:2460-1462). All Rights Reserved.



Creative Commons License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.